12104D107KT2A [KYOCERA AVX]
X5R Dielectric General Specifications; X5R电介质一般规格型号: | 12104D107KT2A |
厂家: | KYOCERA AVX |
描述: | X5R Dielectric General Specifications |
文件: | 总3页 (文件大小:85K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
X5R Dielectric
General Specifications
GENERAL DESCRIPTION
• General Purpose Dielectric for Ceramic Capacitors
• EIA Class II Dielectric
• Temperature variation of capacitance is within ±±15
from -11°C to +81°C
• Well suited for decoupling and filtering applications
• Available in High Capacitance values (up to ±00μF)
PART NUMBER (see page 2 for complete part number explanation)
1210
4
D
107
M
A
T
2
A
Size
(L" x W")
Voltage
4 = 4V
Dielectric
D = X1R
Capacitance Capacitance
Failure
Rate
A = N/A
Special
Code
A = Std.
Terminations
T = Plated Ni
and Sn
Packaging
2 = 7" Reel
4 = ±3" Reel
7 = Bulk Cass.
9 = Bulk
Code (In pF)
2 Sig. Digits +
Number of
Zeros
Tolerance
K = ±±05
M = ±205
6 = 6.3V
Z = ±0V
Y = ±6V
3 = 21V
D = 31V
1 = 10V
NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers.
Contact factory for non-specified capacitance values.
TYPICAL ELECTRICAL CHARACTERISTICS
Temperature Coefficient
Insulation Resistance vs Temperature
10,000
1,000
100
20
15
10
5
0
-5
-10
-15
-20
0
-60 -40
-20
0
+20 +40 +60 +80
0
20
40
60
80
100
120
Temperature °C
Temperature °C
24
X5R Dielectric
Specifications and Test Methods
Parameter/Test
Operating Temperature Range
Capacitance
X5R Specification Limits
Measuring Conditions
Temperature Cycle Chamber
-11ºC to +81ºC
Within specified tolerance
≤ 2.15 for ≥ 10V DC rating
≤ 3.05 for 21V DC rating
Freq.: ±.0 kHz ± ±05
Voltage: ±.0Vrms ± .2V
For Cap > ±0 μF, 0.1Vrms @ ±20Hz
Dissipation Factor
≤ ±2.15 Max. for ±6V DC rating and lower
Contact Factory for DF by PN
±0,000MΩ or 100MΩ - μF,
whichever is less
Charge device with rated voltage for
±20 ± 1 secs @ room temp/humidity
Charge device with 3005 of rated voltage for
±-1 seconds, w/charge and discharge current
limited to 10 mA (max)
Insulation Resistance
Dielectric Strength
No breakdown or visual defects
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
No defects
≤ ±±25
Deflection: 2mm
Test Time: 30 seconds
Resistance to
Flexure
1mm/sec
Meets Initial Values (As Above)
≥ Initial Value x 0.3
Stresses
90 mm
≥ 915 of each terminal should be covered
with fresh solder
No defects, <215 leaching of either end terminal
Dip device in eutectic solder at 230 ± 1ºC
for 1.0 ± 0.1 seconds
Solderability
Appearance
Capacitance
Variation
≤ ±7.15
Dip device in eutectic solder at 260ºC for 60
seconds. Store at room temperature for 24 ± 2
hours before measuring electrical properties.
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Resistance to
Solder Heat
Meets Initial Values (As Above)
Meets Initial Values (As Above)
Meets Initial Values (As Above)
No visual defects
≤ ±7.15
Appearance
Capacitance
Variation
Step ±: -11ºC ± 2º
Step 2: Room Temp
30 ± 3 minutes
≤ 3 minutes
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Thermal
Shock
Meets Initial Values (As Above)
Meets Initial Values (As Above)
Step 3: +81ºC ± 2º
Step 4: Room Temp
30 ± 3 minutes
≤ 3 minutes
Repeat for 1 cycles and measure after
24 ± 2 hours at room temperature
Charge device with ±.1X rated voltage in
test chamber set at 81ºC ± 2ºC for ±000 hours
(+48, -0). Note: Contact factory for *optional
specification part numbers that are tested at
< ±.1X rated voltage.
Meets Initial Values (As Above)
No visual defects
≤ ±±2.15
≤ Initial Value x 2.0 (See Above)
≥ Initial Value x 0.3 (See Above)
Load Life
Remove from test chamber and stabilize
at room temperature for 24 ± 2 hours
before measuring.
Meets Initial Values (As Above)
No visual defects
Store in a test chamber set at 81ºC ± 2ºC/
815 ± 15 relative humidity for ±000 hours
(+48, -0) with rated voltage applied.
≤ ±±2.15
Load
Humidity
≤ Initial Value x 2.0 (See Above)
≥ Initial Value x 0.3 (See Above)
Meets Initial Values (As Above)
Remove from chamber and stabilize at
room temperature and humidity for
24 ± 2 hours before measuring.
25
X5R Dielectric
Capacitance Range
PREFERRED SIZES ARE SHADED
SIZE
01005
0201
0402
0603
0805
1206
1210
1812
Soldering
Packaging
Reflow Only
Reflow Only
All Paper
Reflow/Wave
All Paper
Reflow/Wave
All Paper
Reflow/Wave
Reflow/Wave
Reflow Only
Reflow Only
All Paper
0.40 0.0ꢀ
(in.) (0.016 0.000ꢃ)
Paper/Embossed
Paper/Embossed
Paper/Embossed
All Embossed
mm
0.60 0.0ꢁ
1.00 0.10
1.60 0.1ꢂ
ꢀ.01 0.ꢀ0
ꢁ.ꢀ0 0.ꢀ0
ꢁ.ꢀ0 0.ꢀ0
4.ꢂ0 0.ꢁ0
(L) Length
(0.0ꢀ4 0.001)
(0.040 0.004)
(0.06ꢁ 0.006)
(0.079 0.00ꢃ)
(0.1ꢀ6 0.00ꢃ)
(0.1ꢀ6 0.00ꢃ)
(0.177 0.01ꢀ)
mm
0.ꢀ0 0.0ꢀ
0.ꢁ0 0.0ꢁ
(0.011 0.001)
0.ꢂ0 0.10
(0.0ꢀ0 0.004)
0.ꢃ1 0.1ꢂ
(0.0ꢁꢀ 0.006)
1.ꢀꢂ 0.ꢀ0
(0.049 0.00ꢃ)
1.60 0.ꢀ0
(0.06ꢁ 0.00ꢃ)
ꢀ.ꢂ0 0.ꢀ0
(0.09ꢃ 0.00ꢃ)
ꢁ.ꢀ0 0.ꢀ0
(0.1ꢀ6 0.00ꢃ)
(W) Width
(in.) (0.00ꢃ 0.000ꢃ)
mm
(in.)
0.10 0.04
(0.004 0.016)
0.1ꢂ 0.0ꢂ
(0.006 0.00ꢀ)
0.ꢀꢂ 0.1ꢂ
(0.010 0.006)
0.ꢁꢂ 0.1ꢂ
(0.014 0.006)
0.ꢂ0 0.ꢀꢂ
(0.0ꢀ0 0.010)
0.ꢂ0 0.ꢀꢂ
(0.0ꢀ0 0.010)
0.ꢂ0 0.ꢀꢂ
(0.0ꢀ0 0.010)
0.61 0.ꢁ6
(0.0ꢀ4 0.014)
(t) Terminal
WVDC
6.ꢁ
4
6.ꢁ 10 16 ꢀꢂ
4
6.ꢁ 10 16 ꢀꢂ ꢂ0
4
6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0
4
6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 ꢀꢂ ꢂ0
Cap
(pF)
100
1ꢂ0
ꢀꢀ0
A
A
A
C
ꢁꢁ0
470
6ꢃ0
A
A
A
C
C
C
W
L
᭢
T
᭢
1000
1ꢂ00
ꢀꢀ00
B
B
A
A
A
A
C
C
C
A
t
ꢁꢁ00
4700
6ꢃ00
A
A
A
C
C
C
G
G
Cap
(µF)
0.010
0.01ꢂ
0.0ꢀꢀ
A
C
C
G
G
G
G
G
G
G
A
A
*
*
C
C
C
C
N
0.0ꢁꢁ
0.047
0.06ꢃ
C
C
C
G
G
G
G
G
G
G
G
N
N
N
0.10
0.1ꢂ
0.ꢀꢀ
A
A
*
*
C
C
G
G
G
G
N
N
N
N
N
N
A
*
C
C
*
*
G
Q
0.ꢁꢁ
0.47
0.6ꢃ
G
G
G
G
N
N
N
C
*
Q
Q
Q
X
1.0
1.ꢂ
ꢀ.ꢀ
C
C
*
*
C
C
*
*
C
*
G
G
G
J
*
N
N
N
P*
Q
Q
X
Z
X
X
X
G
*
G
*
J
*
J
J
*
*
N
N
Q
ꢁ.ꢁ
4.7
10
J
J
*
*
J
J
J
*
*
*
J
J
*
*
N
N
N
N
Q
Q
Q
Q
Q
Q
E
*
N
N
*
*
N*
*
Q
Q
Q
Q
Z
Z
K
N
*
N
*
Q
*
X
Z
Z
*
Z
ꢀꢀ
47
N*
*
*
Q
Q
*
*
Q
*
Q
*
Z
Z*
Z
Z
*
100
WVDC
Z*
4
Z*
6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 ꢀꢂ ꢂ0
4
6.ꢁ 10 16 ꢀꢂ
4
6.ꢁ 10 16 ꢀꢂ ꢂ0
4
6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0 6.ꢁ 10 16 ꢀꢂ ꢁꢂ ꢂ0
SIZE
01005
0201
0402
0603
0805
1206
1210
1812
Letter
Max.
Thickness (0.01ꢁ)
A
0.ꢁꢁ
B
0.ꢀꢀ
(0.009)
C
0.ꢂ6
(0.0ꢀꢀ)
E
G
0.90
(0.0ꢁꢂ)
J
K
1.0ꢀ
(0.040)
M
1.ꢀ7
(0.0ꢂ0)
N
1.40
(0.0ꢂꢂ)
P
1.ꢂꢀ
(0.060)
Q
1.7ꢃ
(0.070)
X
ꢀ.ꢀ9
(0.090)
Y
ꢀ.ꢂ4
(0.100)
Z
ꢀ.79
(0.110)
0.71
(0.0ꢀꢃ)
0.94
(0.0ꢁ7)
PAPER
EMBOSSED
= Under Development
= *Optional Specifications – Contact factory
NOTE: Contact factory for non-specified capacitance values
26
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明